Front Sensors

The Leather FX front sensors system operates in a similar fashion to the rear system, with some noticeable differences.

They have a full range coverage on all four sensors with a maximum range of 90cm. Provides the driver with a visual guide by illuminating LED’S. When the vehicle is within 30cm of an object and the red LED’s are illuminated on one or both sides of the display the driver will hear a one second audible tone.

COVERAGE PATTERN

The Leather FX Ultrasonic Front Sensor System electronically scans the area ahead of your vehicle during parking procedures and acoustically alarms you to other vehicles or objects within close proximity.

BENEFITS

Park with increased safety and confidence. Faster and easier parking, especially in tight situations. Helps prevent accident damage when parking. Provides side protection for narrow lanes or garages.

THE DETECTION AREAS GIVE COMPLETE COVERAGE.

DIGITAL DISPLAY

FLAT BUMPER SENSOR

reversing sensor

Most commonly used sensor head – required to be at least 450 mm above ground level on a vertical surface. This sensor head can be painted to match your vehicles colour.

10 DEGREE SENSOR

reversing sensors

Used on curved surfaces and can be installed 10 degree up or down to straighten out the line of sight for the ultrasonic signal. This sensor head can be painted to match your vehicles colour.

FLAT RUBBER SENSOR

reversing sensors

Used on metal bars to avoid interference. Extremely durable to harsh weather conditions. NOT paintable

10 DEGREE RUBBER SENSOR

reversing sensors

Used on curved surfaces and can be installed 10 degree up or down to straighten out the line of sight for the ultrasonic signal. Used on metal bars to avoid interference. NOT paintable.

Get in touch

LeatherFX Contact 0410 753 130